Category Archives: Rings

Rings by Helen Burrell for sale. These are my original designs which can be made especially for you – in any metal with any stones.

bespoke necklaces created to order by helen burrell

bespoke necklaces created to order by helen burrell

bespoke necklaces created to order

bespoke necklaces created to order

One of my main areas of work is to create ‘one off’ bespoke special pieces in the form of necklaces or bracelets, and even rings have been made, which have significance in terms of the themes they represent.

 

I have recently finished one, based on ‘a walk in derbyshire’ which had great significance for my client….

These pieces can be either relating to memories my clients may have, such as a holiday they remember or a special place or person perhaps…

I work with them to create a unique piece of jewellery which will serve to be worn in their lifetime, but can then be passed on as an heirloom later .

The one shown here is one of my own ‘Four seasons’ necklaces…

this one is based on ‘Winter’ as the theme. I can include my clients’ own valuable and sentimental items of family jewellery if if they choose to do so, as often these pieces are of great importance but are just left in a draw even though they mean so much to my clients, this way they can be revived into something to be worn again and appreciated.

If you would like to discuss your special piece please feel free to call me on 01509 239348

Helen 🙂

Posted in Commissions, Jewellery Design, Life Story Necklaces, Necklaces, News, Portfolio, Rings |

tanzanite and 18ct rose gold ring

Tanzanite and 18ct rose gold ring

I was asked by my client to source a beautiful Tanzanite for her, to have set in a simple four claw 18ct rose gold ring, I was able to show her a selection of stones and this was the one she chose, it has made a wonderful ring .

My thanks to her for this commission .

I work with my contacts in the trade to find the best stones for each of my clients based on their requirements, this way they can have a particular stone of their own choice to suit the special designs that I am commissioned to create.

Call me if you have something in mind, and we can work together to make something beautiful .

Helen       01509 239348

tanzanite and 18ct rose gold ring

beautiful tanzanite and 18ct rose gold ring

Posted in Commissions, News, Portfolio, Rings |

diamond ring

 

A commissioned piece , created with new gold and my clients’ diamonds, reset into one of my new designs.

diamond ring with leaves

diamond ring with leaves

Posted in Commissions, Jewellery Design, News, Portfolio, Rings |

three beads ring

three bead ring

18ct gold set with a Ceylon sapphire and diamond

I go to St Ives at least once a year  on holiday and get inspired . New pieces are added to my ranges as time passes, this one was a commission, but can be recreated in different  precious metals and with your choice of stones , each piece is then still an original design.

three beads ring This one is to go into my ‘Garden’ range  on my new website which you can see at:-

www.creative-jewellery.com                                                                                                                   and has the feel of nature about it, which                                                                                           is reflecting walks I have had in Cornwall                                                                                           and the Lake district too.

Posted in Commissions, Jewellery Design, News, Portfolio, Rings |

CAD design available

orange sapphires and Gvs quality dIamond ring replica

The finished piece showing the wonderful quality of the stones from my supplier Simon , and the wonderful craftsmanship of my setter Craig. my thanks to both of them.

CAD design available, I now have links with very good CAD contacts,who use ‘computer aided design’ who can create intricate and multi stone set jewellery designs.  An example of CAD is the ring you see on the left, this is created in 18ct yellow gold, and is set by hand, by my wonderful setter Craig, with an unusual array of orange sapphires and beautiful diamonds.The stones were personally sourced by my stone dealer Simon, and chosen for the best colour match for my client, resulting in this beautiful ring.

 

My thanks to my client for the lovely commission.

Posted in Commissions, Engagement Rings, Jewellery Design, Rings |

Guide to buying an engagement ring.

Guide to buying an engagement ring.

If you are looking for a special ring it can be daunting,  there are so many choices to make, – so how do you go about finding the right ring at the right price?

I can offer you guidance throughout the process to have something special made, and can design and make the ring for you.
You can find out first through conversation with you partner what it is they would prefer
First settle on which precious metal you would like the ring to be created in………….
notice what your partner tends to wear already, or if it is not a surprise preferably ask them, will it be :-
• Silver,
• 9ct yellow gold,
• 9ct white gold,
• 18ct yellow gold or
• 18ct white gold ,
• platinum?

Then find out which stones are preferred.

Traditionally solitaire diamonds are  aspired to, or you could choose to have a larger coloured stone with supporting smaller diamonds.

I recently found out from a jewellers forum  a  good tip for finding out what your partners preference for design is .  To do this – notice where they place a vase or special object they value on a mantle piece, is it in the centre?, or off to the side?- this observation is a good indicator as to whether they like symmetry or asymmetry and that will help me in the design process to create something for you that will please them to wear.

I will also need their finger size to do the estimate , so if you can ‘borrow’ a ring that fits them already – that would be great, as you could get it measured by placing it on your own finger and marking where it comes to.

Then get your finger sized to that point in any local jewellers or if you can, come and see me.

Alternatively if they only wear a ring on the right hand ring finger we can design and make the ring slightly smaller than that, and it could then be stretched to fit if needed later.

Once you have settled on a size then I can get you a range of prices based on that and different qualities of stone.

if you decide to buy a Diamond then stones of 1 carat or more can be certificated so that you have an assurance that what you have bought is exactly as described.

For  smaller stones I generally recommend a VVS1 or VVS2 quality for the diamonds, this is best if you want the stones to have a ‘good fire and sparkle.’

Diamond Grading Terminology
A diamond’s cost is based on the characteristics known as the “4 C’s”. Clarity, Colour and Cut are the quality elements which together with the Carat Weight determining the value of a stone. The closer a diamond grades to the benchmark for each of these scales, the rarer and the more costly it will be.

The Cut has a profound effect on the visual appearance of a diamond and gives it the fire and sparkle.

Carat Weight
Carat is the unit of weight for all gemstones. One carat is subdivided into 100 “points”. Therefore a diamond measuring 75 points is 3/4 carat in weight, or 0.75ct. (There are five carats in a gram. )

Colour You have a choice in quality between pure flawless and approximately 9 grades of quality below that the top level, the top ones being the most beautiful stones.
Increasing degrees of colour are measured on a scale ranging from no colour at all, the traditional diamond (D) to deeply coloured (Z).
Beyond “Z” is the range where the diamond’s colour is , called “fancy colours”. Diamonds of known colour are used as comparison stones for colour grading.
Clarity is measured on a scale ranging from pure (flawless) to heavily included
A diamond’s clarity is determined by internal characteristics called “inclusions” and surface features called “blemishes”. These irregularities are naturally occurring and were created in the liquid magma (volcanic rock) within which the diamond was formed.
This chart refers to the scale of inclusions, the fewer there are the better the stone is.

 THE GIA DIAMOND CLARITY SCALE says that the grades are defined by these descriptions:-

‘Flawless:  no inclusions or blemishes are visible to a skilled grader using 10x magnification. Extremely rare, less than 1 in 5000 jewelry quality diamonds are rated FL.

IF Internally Flawless: No inclusions, only blemishes are visible to a skilled grader using 10x magnification.
FL and IF Diamonds appear identical unless viewed under 10x magnification by a skilled grader. (Less than 3% of jewellery quality diamonds are rated IF.)

VVS1 Inclusions are typically only visible from the pavilion,Very, Very Slightly Included: Inclusions are difficult for a skilled grader to see under 10x magnification.

VVS2 while VVS2 inclusions are visible from the crown. In each, the inclusions are invisible to the eye, appearing identical to the higher grades unless viewed under 10x magnification by a skilled grader.

VS1 Very Slightly Included: Inclusions are clearly visible under 10x magnification but can be characterized as minor. Inclusions are not visible to the naked eye. Perhaps 1 in 100 untrained observers can detect

VS2 inclusions may be seen with the naked eye, on close inspection under ideal conditions.

SI1 Slightly Included: Inclusions are noticeable to a skilled grader using 10x magnification. SI1 is the lowest grade with flaws often invisible to the naked eye.

SI2 inclusions are usually visible to the naked eye, although they will require close inspection.
I1
I2
I3 Included: Inclusions are obvious under 10x magnification and may affect transparency and brilliance.
I1 diamonds have inclusions that are almost always visible to the naked eye.’
(I would not normally recommend using these lower grades.)

As you can see from this Information, the quality level for the stone has an impact on the price you would pay for it, but will also, because of the various grades, give you room to adjust the choice of stone to fit your budget.

If for instance you want to keep to a particular size of stone such as a full or half carat , There will be the various qualities at different price levels to choose from in those sizes.
………………………………………………………………………………………………………….
Another white stone to consider is white sapphire, which is beautiful but has slightly less fire to it.
This offers you the choice of a very good price in terms of a comparable sized diamond.

Topaz cabochon set in rose gold

blue topaz ring

Please make sure your partner would be happy with this idea, as it could be they would prefer a small diamond of a high quality rather than a larger sapphire.

If you would like coloured stones then I will be able to guide you through the alternatives.
I have found some stones such as topaz to be beautiful when cut as a cabochon stone, this is a relatively affordable stone even in a large size but can look stunning in a simple setting.

This is an illustration of a dress ring, but smaller topaz cabochon stones could be used to good effect in an engagement ring with supporting diamonds perhaps on either side of the centre stone.

Other semi precious stones such as garnet, citrine , lapis lazuli etc. can also be sourced as a cabochon stone.

Please feel free to enquire.

 

The illustration below is of a double commission I had from my clients to make a set of a new eternity and an engagement ring, created in 18ct yellow gold.

My clients’ diamonds from her original cluster ring were set into the flower ring shown here, a new diamond was supplied for the larger stone.

rings created on the theme of a garden in 18ct gold and set with diamonds.

rings created on the theme of a garden in 18ct gold and set with diamonds.

The two rings sit together with a space between for my clients wedding band.

The two rings sit together with a space between for my clients wedding band.

I received a wonderful testimonial from my client Karen:-

 A lovely testimonial, my thanks to  Karen  for the commissions.

A lovely testimonial, my thanks to Karen for the commissions.

 

 

 

 

 

 

 

The next step is to Consolidate your thoughts by deciding:-


1 What size of stones you would like in mm across the stone
2. What shape you prefer, round, oval, square , emerald cut pear shape etc.
3. Which precious metal  you think your partner would choose.
4. Consider whether your partner likes simple designs, or elaborate designs   open  wire work ,wide or narrow shanks , ie (the band that goes around the finger.)
5. Claw set stones, or bezel set, (a ‘bezel’ set is a rub over of the metal all around the stone which holds it into the setting. If you imagine a small tube with the stone set into the top with a rim of metal holding it all round, that is a bezel setting.) This is one style of setting I use as a preference in many of my designs , and is more practical to wear, but for larger stones the claw setting allows  more light to shine through the stone..
6.  and finally What size is the ring to be?.

I am happy to work with you to finalize the design, you can then discuss the design details with me either by email, or phone and I will do a sketch to show you the final idea, it can still be tweaked at this stage.

If you have no idea what you would like made, in terms of a design, then I offer a selection of ideas for a charge of £55.00 or will interpret your ideas through our conversations, to come up with a finalized idea in a sketch to enable you to visualize it.

Once we have reached an agreement based on your choices above, I can get an estimate worked out;- then if you are happy with everything, and you wish to give me the ‘go ahead’ then normal delivery time would be 4 – 6 weeks depending on the complexity of the job..
I look forward to hearing from you…..

Please feel free to call me on 01509 239348
To make an appointment to see me in Loughborough, or come to see me at my shop in Melbourne in south Derbyshire which is normally open on Fridays and Saturdays 11-4.00 o clock (directions are on the ‘about’ page of this website). please give me a ring to confirm I will be there if you are coming a distance.
or you can email me on :-
helen@helenburrell.co.uk

Many thanks Helen.:)

Posted in Commissions, Engagement Rings, Jewellery Design, News |

Ruby engagement ring

This piece was a commission to create a Ruby engagement ring for my client, with a leaf details as decoration, I love the colour of this stone, rubies come in many shades varying from a bright pink to the mid ranges and deep reds.
If you are not sure of your preferences you can order a selection of stones on approval to choose from, and in varied shapes too, – square, pear or ovals are available in most of the precious stones as well as ruby.
please feel free to enquire, and I can design a piece for you in which the stone you choose can be set .
Tel 01509 239348

A Commissioned piece.

A Commissioned piece.


My thanks to my client for this lovely commission.

Posted in Commissions, Engagement Rings, News, Portfolio, Rings |

I am now an official supplier for Charles Green wedding and engagement rings

CG_50

Charles Green diamond and white gold engagement ring

diamond and white gold ring

Engraved Wedding Bands

An engraved set of Charles Green Wedding Bands

Although I offer a service to create your wedding rings from old family gold or from new gold, and will create unusual rings if required, I am also able to supply the best ‘ready made’ rings I know of in the ‘Charles Green’ range.
They also have an excellent bespoke service if you want something unusual.

wedding rings

A Charles Green set of heavy gold Wedding rings.


Here are some examples of some beautiful rings created by the Charles Green company.
To see further examples you can visit their’ web site at :-
www.charles-green.co.uk and then, with the reference codes, you can get in touch with me to order your preferred designs for both wedding and engagement rings. tel 01509 239348 for any enquiries.

Diamond engagement and white gold wedding ring, A 'Charles Green' set

Diamond engagement and white gold wedding ring, A ‘Charles Green’ set

flat section wedding bands

Flat section wedding bands by Charles Green, various widths available .

Court wedding rings

Heavy court rings available in yellow or white golds.

brushed gold wedding bands

brushed gold two colour or plain rings


With the very wide range of wedding and engagement rings, dress rings, and jewellery in general from Charles Green and those I can create for you, most design ideas are possible so please feel free to enquire.
supplier contact number :- 01509 239348
Helen

Posted in Engagement Rings, Jewellery For Sale, News, Wedding Rings |

9ct gold ring, set with three matching beautiful green tsavorite stones based on a hedgerow theme ©

Just offered for sale :- This is an original hand crafted ‘Helen Burrell’ design,
A 9ct gold ring set with three beautiful matching tsavorite stones, based on a hedgerow theme, with leaves and berries entwined around the ring.
this was a complicated design to create and took many hours to do , but worth the time and effort as it worked out well, and sits beautifully on the finger.
The tsavorites are some of the best my stone supplier had seen in a long time , he was very excited about them,they are very bright green stones full of light and sparkle……….
£1,125.00.
please contact me if you would like it reserved,
Tel:- 01509 239348
Size ‘M’ (it could be made bigger or slightly smaller if required)
DSCF8951

Posted in Engagement Rings, Jewellery Design, Jewellery For Sale, News, Portfolio, Rings |

cuttlefish bone casting to create wedding bands

One of the services I offer is cuttlefish bone casting to create wedding bands, I can recycle any ‘family gold’you may have to create your wedding bands, or shanks for engagement or dress rings.
This keeps the sentiment and family connections within the piece and is done by using one of the oldest techniques of ‘cuttlefish bone’ casting.
The Process:-
The bone is cut in two, each half is flattened against the other by rubbing them together,then an impression is made into the bones in the form of a D shape or square groove. A shaped funnel is cut at the top of the bones once both halves are bound together. The molten gold can then be poured into it when casting. The cuttlefish can then be used as a mould for the gold bar required to make the ring.

helen burrell cuttlefish casting information

A funnel shape is carved into the top of the cuttlefish bone for the molten gold to pour in when casting.

new and old gold ready to cast.

In the workshop ready to cast ……….

Anealing the gold

The gold needs to be softened ready for rolling out to shape.

The rolling mill

A rolling mill helps to form the final shape of the gold.


Then once the gold is the right length and shape it can be formed into a circle and soldered, followed by filing to remove any marks or scratches and finally polishing is done to finish the ring……..

A cuttlefish cast wedding ring

The gold ring created from family gold and new gold casting grain


please feel free to contact me if you have special items you would like reworked and recycled.
tel. 01509 239348
Helen

Posted in Commissions, Portfolio, Reworking Gold, Wedding Rings |